CE marking standard in electronics

Anthémis technologies is an electronic design office offering subcontracting  production of electronic card . We guarantee you increased vigilance regarding the use of components and materials for the design of your electronic products. We can therefore assure you that they meet CE marking standards .

CE marking, particularly in electronics, is the symbol of the manufacturer’s declaration indicating that the product or device offered complies with all European community regulations. The requirements imposed by these regulations are all contained in the various European directives (laws) and standards (testing and design). The directives, with the corresponding European standards, respond to all concerns regarding safety , electromagnetic compatibility (EMC), health , and protection of the environment .

“A single mark must be used to facilitate inspections by inspectors on the community market and to clarify the obligations of economic operators [manufacturers or suppliers] […]; the purpose of the CE marking is to symbolize the conformity of a product […] and to indicate that the economic operator has carried out all all the evaluation procedures required by Community law concerning his product ”(JOCE; 93 / 465 / EEC)

The main objectives of CE marking are:

  • Indicate the product’s compliance with the essential requirements contained in the directives,
  • To allow products to be placed on the market,
  • To ensure the free movement of goods,
  • To allow the withdrawal of non-compliant products by customs services and competent authorities.
Marquage CE Électronique

The conformity of most products must be assessed, either by the manufacturer himself or by an accredited body, and these must bear the CE mark before their placing on the European market. The CE mark indicates that the product complies with the applicable directives and that the manufacturer has carried out the various necessary evaluations. Neither the quantity of products or machinery imported nor the nature of the transfer carried out constitutes a sufficient reason for exempting the manufacturer from conformity assessments and CE marking. The CE marking applies to all equipment put into service in the public or private domain, for professional or non-professional use, free or for a fee.

List of new approach directives for C markup

Directive Reference number 1 Effective date
Low voltage (DBT) 73/23 / EEC 1/1/1997
Electromagnetic compatibility (EMC) 89/336 / EEC 12/31/1995
Machines 89/392 / EEC 12/31/1994
Single pressure vessel 87/404 / EEC 1/7/1992
Pressure equipment 97/23 / EC 05/29/2002
Devices in explosive atmospheres 94/9 / EC 6/30/2003
Active implantable medical devices (AIMD) 90/385 / EEC 12/31/1994
Medical devices 93/42 / EEC 6/15/1998
In vitro diagnostic medical devices (IVD) COM (95) 130 7/1/2002
Telecommunications terminal equipment² 98/13 / EEC 11/6/1992 or 5/1/1995
Non-automatic weighing instrument 90/384 / EEC 1/1/1993
Gas appliance 90/396 / EEC 12/31/1995
Household electrical appliances (energy efficiency) 96/57 / EEC 9/3/1999
Toy safety 88/378 / EEC 1/1/1990
Pleasure craft (small boats) 94/25 / EEC 6/16/1998
Hot water boilers 92/42 / EEC 1/1/1998
Construction products 89/106 / EEC 6/27/1991
Personal protective equipment 89/686 / EEC 93/95 / EEC 1/7/1995
Elevators 95/16 / EC 1/7/1999
Civilian explosives 93/15 / EEC 1/1/2003
  1. After 1993, the directives end with the initials CE
  2. Directive 98/13 / EEC replaced Directives 91/263 / EEC and 93/97 / EEC

Specialized in the world of electronics and IoT , our electronic design office designs connected objects entirely and of quality in order to meet market requirements.

Other posts

Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Start typing and press Enter to search

CAD- und Electronic-Board-Routing - einfache und komplexe Leiterplatte - Anthemis-TechnologieRetro Electronic Board Design